B & B for the current models of the Range Rover Evoque is a comprehensive retrofit program was completed. The engine power increases in the strongest expansion phase to 300 hp and max. 500 Nm, enabling performance by the manufacturer of 0-100km / h in 6.5 seconds and 230km / h top speed.
RR Evoque eD4 2.2 – 150 hp / 380 Nm + 2.2 TD4 – 150 hp / 400 Nm
The engine range of the RR Evoque eD4 2.2 + 2.2 TD4 with 110 kW / 150 HP starts with a change of electronics and a slight increase in boost pressure from ca.0, bringing to 15 bar to 132 kW / 180 PS and 450 Nm. By special injection elements in conjunction with work on intake paths, air ducts and intercooler, this engine reaches its second phase 147 kW / 200 hp and maximum torque of 475 Nm.
RR Evoque SD4 2.2 – 140 kW / 190 hp / 420 Nm
The engine range of the RR Evoque 2.2 SD4 with 140 kW / 190 HP starts with a change of electronics and a slight increase in boost pressure to ca.0, 2 bar to bring the engine to 169 kW / 230 hp and 480 Nm. By special injection elements in conjunction with work on intake paths, air ducts and intercooler, this engine achieved in stage 2 sporty 180 kW / 245 hp and maximum torque of 500 Nm.
RR Evoque Si4 2.2 – 176 kW / 240 hp / 340 Nm
When the RR Evoque 2.2 Si4 engine starts the 3-stage motor program with a change in the electronics and a slight increase in boost pressure to increase the performance of the 2.2 engine to 200 kW / 272 hp and 400 Nm. In stage 2, 210 kW / 286 PS and 410 Nm are achieved. Here, air induction, air ducts and intercooler can be optimized to increase the boost pressure bar ca.0, 25 and matched the injection map to these new changes. Level 3 (220 kW / 300 hp / 425 Nm) includes in addition to Level 2, a B & B sport exhaust system with sport catalysts, which reduces the exhaust back pressure and exhaust gas temperature significantly. In addition, an adjustment of engine management. This results in a higher power output is achieved while reducing the thermal load of the engine and turbocharger.
RR for all Evoque models lowering is available to approximately 30 mm. This measure reduces the rolling motions of the vehicle and provides sportier handling without affecting the comfort. Allen RR Evoque owners with the desire for a lift kit about 30 mm can also be helped.
To reduce exhaust back pressure and exhaust gas temperature and improve the sound quality built B & B, a sports exhaust system made of solid stainless steel which results in an additional power increase of about 5 hp. For a corresponding increase in the performance delay, a special 6-piston high performance brake system which the RR Evoque drivers will always give you peace of mind superior security. Exclusive wheels in 19 “/ 20” / 22 “round the outside of the sport Evoque from managed.
Previous article
Ford Fusion at SEMA